Svenska 
Polski (PL) 
Greek 
German 
Portuguese 
Chinese 
French AZ Light - Receiver for AZ-Radio Loggers
AZ-light will help you efficiently to reduce water losses and significantly to cut on personnel costs
- (1) receiver
- (2) standard logger
- (3) switch magnet
- (4) magnet for pick-up
- (5) hydrophone logger
Technical Details:
| Display: | LCD, illuminated |
| Displayed: |
- statistical minimum level of last night - statistical minimum level of past 14 days - measurement quality (rain,wind,etc..) - actual high/low - logger serial number |
| Memory | - automatic (of the past 14 measurements) - capacity 100 (optional 2,000 loggers) |
| Receiving Frequency | 433 MHz (other Frequencies upon request) |
| Aerial | built-in |
| Connections | USB plug |
| Power Supply | batteries: 4 pieces 1,5 V (AAA) operation time: aprx. 100 hours, depends of battery capacity |
| Range of Temperature | -15°C until + 55°C |
| Dimensions | 205 / 105 / 30 mm (central unit) |
| Weight | 400 Gramm |
 |
PipeMic - Pipe Searching/Leak Locating
- locating leakages with utmost precision
- locating pipes including endpoint
- no interference of ambient noise
- data transfer via Bluetooth
Range of Use
Home connections are usually made of plastic water pipes. The plastic water pipes reveal the leakage borne noise inadequately. This constitutes a problem for customary correlation procedures. In addition, the exact run of a pipe is often known only vaguely, which frequently leads to misdiggings.
With the acoustic pig developed by F.A.S.T., cracks on home connections/pipes can be located easily due to a special lock which allows the probe to be pushed into the pipe with high pressure (up to 16 bar). As the length and the exact position of the inserted glass fibre can be determined, the leakage spot can be determined with utmost precision.
The acoustic signals are transferred to the headphones and to the geophone respectively vie bluetooth. The noise level received is then acoustically and optically displayed on any Aqua-M series (70-300) geophone.
- both pipe location and leakage detecting process
- locating leakages with utmost precision
- no interference of ambient noise
- indication of applied rod length
- quick measurement results
- easy to operate
- data transfer to geophone/headphones via Bluetooth
- integrated disinfectant tank
Extent of Supply standard
- aluminium reel with frame
- glass fibre
- flexible sensorhead
- pressure tight lock with integrated disinfectant tank
- mechanical length counter
- Bluetooth transmitter
- Bluetooth headphones
- instruction manual
Extent of Supply extended
- aluminium reel with frame
- glass fibre
- flexible sensorhead
- pressure tight lock with integrated disinfectant tank
- mechanical length counter
- Bluetooth transmitter
- Bluetooth headphones
- instruction manual
Technical Specifications
| design | aluminium die casting/glass fibre |
| dimensions | 570 x 400 x 160 mm |
| diameter | glass fibre: 4.5 mm measuring head: 12 mm |
| weight | 7 kg |
| pipe lock | 16 bar |
| temperatur range | 0°C up to 50°C |
| safety class | IP 66 / IP 68 |
| locating depth | up to 3.5 m |
|
Md-100 - Ferrous Metal Detector
- unique response
- ergonomic housing
- carbon fibre sensor tube
- easy to operate
- extrem light weight device
- 4 x AA battery operation
Range of Use
The MD-100 sets the new benchmark when it comes to the detection of metallic objects. Even small parts made of metal can be detected quickly, easily and precisely. The MD-100 responds to ferromagnetic objects whereas non-metal objects are not indicated.
- unique response
- ergonomic housing
- carbon fibre sensor tube
- easy to operate
- extrem light weight device
- battery operation possible
- operating time of approx. 50 h
under regular operating conditions - LCD with backlight
- acoustic and optical indication
- warning signal in case of current carrying wires
- CAL-function to fade out interfering objects
Extent of Supply
- mainframe
- transport bag
- 8 x AA batteries
Technical Specifications
| design | shock resistant carbon fibre |
| weight | 830 g |
| dimensions | 1080 x 70 x 130 mm |
| aerials | twin coil |
| temperature range | -20°C to +50°C |
| safety class | IP 64 / IP 68 |
| depth range | (approx.) slide rod 1,2 m manhole cover 2,5 m valve cap 1,5 m |
|
Fahrzeugausbau
Specialized Test Van for the Supply Industry
For over 20 years we build special vehicles for utility companies and service enterprises. Thanks to our modular and robust lightweight construction nearly all customers wishes are realizable.
- Test van for the systematic leak reduction
- Test van for daily leak detection
- Special van for the emergency department
- Tools van for the water supply industries
The vehicles are realized in the narrowest cooperation with the customer. Compared with customary systems we guarantee by the individual planning of every vehicle, and the application of our ingenious aluminium profile system, the most optimum exploitation of the cabin space togheter with the slightest weight of the mounted rack.
By the application of the most modern technology we create a working vehicle with a maximum of value, security and comfort.
Overview of benefits
- individual mounting
- ideally for all vehicle variations and manufactures
- robust construction
- light weight construction
- energy and cost-saving
|
|
Absauganlage
Mobile Extraction System
A dangerous situation in a manhole may occur when hazardous gases get into the manhole from the outside or are generated in the manhole.
Excerpt from the special edition issued by the professional association:
Gas-related hazards in manholes
In order to eliminate gas-related hazards in manholes, preventive measures have to be taken before the manhole is entered. A recommended safety measure is the application of high-capacity fans. In the field, this kind of extraction is applied at the deepest point of the manhole. "Extraction of air = 4 x volume of the manhole".
The mobile extraction unit by F.A.S.T GmbH is supplied as a compact unit and can be delivered in two versions.
- with EX protected motor version (Typ VARW 225/2 EX)
- not EX protected motor version (TYP VARW 225/4)
|
